拍图更灵活，选型与交付更顺手More flexible drawings. Easier selection and delivery.

自定义拍图Custom Make2D

按需要组合出图方向Choose the views you need

新增 11 个视图开关，默认开启主视图、俯视图和左视图。可自由组合六个正交方向、四个轴测方向及左视图2，输出所选视图与逐项对应的名称。Eleven view switches let you combine six orthographic directions, four isometric directions and Left View 2. Front, top and left are selected by default; selected views and their names are output in matching order.

水平、垂直间距可自动计算或手动设置。方向选择可撤销并随文件保存；全部关闭时不输出视图。重复调整视图组合时可复用已完成的结果，减少等待。Horizontal and vertical spacing can be automatic or set manually. View choices support undo and are saved with the file. Switching all views off produces no views; completed projections are reused when adjusting a combination.

标准紧固件Standard Fasteners

九类紧固件，一处完成选型与放置Select and place nine fastener types

提供螺栓、自攻螺钉、机螺钉和抽芯铆钉共九类选择，每类使用独立规格与常用长度。可输入大于零的自定义长度，选择放置方向，并输出轻量无螺纹实体或图块。Choose from nine bolt, self-tapping screw, machine screw and blind rivet types, each with its own sizes and common lengths. Positive custom lengths, placement direction, lightweight unthreaded solids and block output are available.

六角头螺栓支持“二平一弹一螺母”。输入夹持间距后自动向上匹配常用长度，预留至少 3 mm 外露；例如 M8、夹持间距 20 mm，选用 35 mm。Hex bolts support two flat washers, a spring washer and a nut. Enter a clamp gap to select the next suitable common length with at least 3 mm projection. For example, M8 with a 20 mm gap selects 35 mm.

装配按五个独立零件输出为一个几何组或图块。垫片与螺母使用固定示意厚度；夹持间距需大于零，超出常用长度范围会提示。普通关闭窗口提交设置，“取消”放弃本次修改。The five separate assembly parts are output as one geometry group or block. Washers and nuts use fixed illustrative thicknesses. The gap must be positive; exceeding the available length range reports an error. Normal window closure commits settings; Cancel discards edits.

选取Rhino图层Select Rhino Layers

在图层树中直接多选Select multiple layers in the tree

右键打开 Set Layers。单击单选，Ctrl 或 Alt 加选、取消，Shift 按展开行连续选择。完整图层路径按树形顺序输出为同一分支的列表。Open Set Layers from the right-click menu. Click for one layer, Ctrl or Alt to toggle additional layers, and Shift to select a range of expanded rows. Full paths are output as a list in one branch, in tree order.

底部单选显示完整路径，多选显示“多个”；长路径自动调整字号并换行，清空后隐藏。选择支持撤销与保存，旧文件中的单个图层路径继续可用。The bottom message shows the full path for one layer and a multiple-selection summary for several. Long paths resize and wrap; empty selections hide the message. Selection supports undo and saving, including existing single-layer values.

按图层选取物件Get Objects by Layer

正则与通配符，按任务选择Choose regex or wildcard matching

右键“匹配方式”新增通配符：* 匹配任意数量字符，? 匹配一个字符，按完整图层路径匹配且忽略大小写。例如 建筑::墙体? 可匹配 建筑::墙体1。The Matching Mode menu adds wildcards: * matches any number of characters and ? matches one. Matching covers the entire full layer path and ignores case. For example, 建筑::墙体? matches 建筑::墙体1.

默认仍为正则表达式，可在完整路径中查找局部匹配。两种规则有明确悬停说明，选择随文件保存；复杂表达式超时会停止并提示简化。Regex remains the default and can find a match within the full path. Tooltips explain both modes, and the choice is saved with the file. Complex expressions that time out stop with a request to simplify them.

截面简化Simplify Section

清理短边，同时限制轮廓偏移Clean up short edges with a deviation limit

在原有截面简化后，进一步清理纯折线闭合轮廓的短边。右键可设置“短边长度”和“最大偏差”；任意一项设为 0 即关闭这一步处理。After the original section simplification, short edges in closed polyline boundaries can be cleaned up. Set Short Edge Length and Maximum Deviation in the right-click menu; either value at 0 disables this step.

含圆弧的非折线环保持原样。若清理产生自交、边界交叉或改变孔洞数量，会保留清理前的简化结果并提示。新放置组件两项默认均为 1；旧文件缺少设置时均为 0.1，单位随模型。Non-polyline loops containing arcs are retained. Self-intersections, crossing boundaries or changed hole counts retain the pre-cleanup result and show a warning. Both values default to 1 for a new component and 0.1 for older files without settings, in model units.

生成图框导出CADGenerate CAD Border and Export

右键选择 AutoCAD 或中望 CADChoose AutoCAD or ZWCAD from the menu

右键“CAD 软件类型”可选择 AutoCAD 或中望 CAD。切换软件本身不会运算或自动导出，按原有流程触发导出即可。Choose AutoCAD or ZWCAD under CAD Software Type. Switching software does not calculate or export automatically; trigger export through the existing workflow.

选择随文件保存，旧文件默认 AutoCAD。已排队的任务保持入队时的软件选择，之后切换不会改变该任务的导出目标。The choice is saved with the file, with AutoCAD as the default for older files. A queued task retains the software selected when it was queued.

LK三步拍图3·导出CADLK Three-Step Drawing 3 · Export CAD

沿用已完成图纸，切换交付软件Export completed drawings to your chosen CAD

参数窗口新增“CAD 软件”，支持 AutoCAD 与中望 CAD。使用第二步已完成的图纸，切换软件无需重新排版或制图。The settings window adds CAD Software with AutoCAD and ZWCAD. It uses the completed stage-two drawing; changing the software does not require layout or drawing regeneration.

“应用设置”保存软件、路径及图框属性对应关系；点击“导出 CAD”才写出文件。软件选择随文件保存，旧文件默认 AutoCAD。Apply Settings saves software, destination and border-attribute mappings. Export CAD writes the file. The software choice persists, and older files default to AutoCAD.

物件拍图Object Make2D

直接检查五视图线稿Inspect five-view drawings directly

保留固定五视图接口，开启组件预览即可查看可见实线、隐藏虚线及范围框；选中组件后高亮显示结果，方便检查视图位置和轮廓。The fixed five-view interface is retained. Enable component preview to see visible solid lines, hidden dashed lines and bounds. Selection highlights the result for easier inspection of position and outlines.

获取物件键、值Get Object Keys and Values

未烘焙图块也能读取信息Read information before baking blocks

可直接连接尚未烘焙的 LK 图块，读取它携带的键值信息，无需先写入 Rhino 文档。存在有效文档对象时，仍优先读取对象属性中的信息。Read key/value information directly from an unbaked LK block without first adding it to the Rhino document. Valid document objects still use their attribute information first.

提取信息Extract Information

直接提取图块上的指定信息Extract a specific value from a block

支持从尚未烘焙的 LK 图块读取指定信息，可与标准紧固件输出衔接。输入准确的键名，即可提取规格、基准平面或中心线等已有数据。Read a specified value from an unbaked LK block, including standard fastener outputs. Use the exact stored key to retrieve existing specifications, datum planes or centerlines.

图层颜色渲染Layer Color Preview

拍图结果可直接按分类预览Preview classified drawing results directly

接入拍图结果后，可见线、隐藏线和范围框保留各自的颜色与线型预览；选中组件时统一高亮，便于确认当前检查的整组结果。Drawing results retain distinct preview colors and patterns for visible lines, hidden lines and bounds. Selecting the component highlights the complete result for easier inspection.

范围框仅用于查看图纸占用范围，不代表真实中心线。预览不会修改原曲线，也不会改变后续 CAD 导出的线型。Bounds show the drawing extent and are not actual centerlines. Preview does not modify source curves or CAD export linetypes.

创建/修改图层Create / Modify Layers

正确更新模型中的首个已有图层Update the first existing layer correctly

修复已有图层位于图层列表首项时被误判为不存在的问题。按原有 Action 或“执行”流程操作时，会更新该图层的颜色、可见性、锁定与线型，不再尝试重复创建。Fixed an existing layer at the first position being treated as missing. Action or Execute now updates its color, visibility, lock state and linetype instead of attempting to create a duplicate.

翻转曲面Flip Brep

无参考向量时减少计算等待Less work when no reference vector is needed

处理非闭合曲面时，不连接参考向量便直接按按钮状态翻转，减少不必要的等待。连接参考向量时，仍按最大面积面的方向判断。For open Breps without a reference vector, flipping follows the button state directly with less unnecessary work. When a reference vector is connected, orientation is still judged from the largest face.

检查弃用组件Check Deprecated Components

正确清理检测生成的定位视图Clean up the views created by a check

重复检测并取消标记时，正确移除本次检测创建的命名视图，避免遗留定位视图或误删其他视图。Repeated checks and clearing markers now remove the named views created by the check, avoiding stale navigation views or deletion of unrelated views.

多段线按边偏移Offset Polyline by Edge

每次输出一条偏移多段线One offset polyline per operation

曲线输出改为单项，每次得到一条偏移后的多段线；各边距离仍以列表输入。打开旧文件后，请核对依赖该输出的下游列表层级与数据匹配。The curve output now delivers one item per operation, while per-edge distances remain a list input. When opening existing files, check downstream list structure and data matching.